Nespresso Vertuo Flashing Yellow? Here’s What You Need to Do!

What Does Nespresso Yellow Light Mean On Vertuo Machines?

The Nespresso yellow light on Vertuo machines can indicate a variety of issues, depending on the frequency and pattern of the light. Generally, a yellow light means that the machine requires attention or maintenance. This could include issues such as needing to be descaled, needing to be refilled with water, or needing to have a capsule inserted correctly. It’s important to pay attention to the pattern of the yellow light, as this can provide clues as to what the specific issue may be.

Depending on lighting conditions, the yellow light can also appear orange color.

Vertuo Plus Yellow Light Scenarios and How to Fix Them

Here are three scenarios when you might see yellow lights on your Vertuo Plus, and how to fix them.

Half YELLOW/ORANGE, Half RED Steady Light

If you see a half-yellow, half-red steady light on your Vertuo Plus, it means that the machine is experiencing a temperature issue. The machine is either too hot or too cold, and it cannot operate until it reaches the right temperature. Here are the steps to fix this issue:

1. Turn off your machine and unplug it from the power source.
2. Let the machine cool down for at least 10 minutes if it was too hot. If the machine was too cold, warm it up by turning it on and letting it run for a few minutes.
3. Once the machine reaches the right temperature, plug it back in and turn it on. The light should turn green, indicating that it’s ready to use.

If the light is still yellow and red, and the machine is not working, contact Nespresso’s customer support for further assistance.

RED Light Flashes Twice and Goes Back to ORANGE/YELLOW Blinking

If you see a red light flashing twice and then going back to orange blinking, it means that your Vertuo Plus needs descaling. Descaling is a process that removes built-up calcium deposits in the machine’s pipes and heating element, which can affect the quality of your coffee. Here are the steps to descale your machine:

1. Fill the water tank with 1 unit of Nespresso descaling solution and 0.5 liters of water.
2. Turn on your machine and wait for the button lights to stop blinking.
3. Place a container under the coffee outlet, and then press and hold both buttons for 3 seconds. The lights will start blinking quickly, indicating that the descaling process has started.
4. Let the solution run through the machine and into the container. The process will take about 20 minutes.
5. Once the process is complete, discard the solution and rinse the water tank thoroughly with water.
6. Fill the water tank with fresh water and run the machine to rinse it.
7. Your machine is now descaled and ready to use.

RED Light Flashing Twice and Goes Back to Steady ORANGE/YELLOW

If you see a red light flashing twice and then going back to steady orange, it means that your Vertuo Plus needs to be cleaned. Over time, coffee oils and residues can build up in the machine, affecting the taste and quality of your coffee. Here are the steps to clean your machine:

1. Fill the water tank with 1 liter of water and add a Nespresso cleaning capsule to the capsule container.
2. Turn on your machine and wait for the button lights to stop blinking.
3. Place a container under the coffee outlet, and then press and hold both buttons for 3 seconds. The lights will start blinking quickly, indicating that the cleaning process has started.
4. Let the cleaning solution run through the machine and into the container. The process will take about 10 minutes.
5. Once the process is complete, discard the solution and rinse the water tank thoroughly with water.
6. Fill the water tank with fresh water and run the machine to rinse it.
7. Your machine is now cleaned and ready to use.

Vertuo Next Yellow Light Scenarios and How to Fix Them

In this section, we will discuss six scenarios when you might see yellow lights on your Vertuo Next, and how to fix them.

Yellow/Orange Light Blinks Two Times Per Second

If you see a yellow/orange light flashing two times per second on your Vertuo Next, it means that the machine is experiencing a water issue. The machine is either low on water or has a water flow issue, and it cannot operate until the problem is fixed. Here are the steps to fix this issue:

1. Turn off your machine and unplug it from the power source.
2. Check the water tank to ensure that it is properly filled with water.
3. Check the water flow path and make sure it is not blocked.
4. Clean the water tank and the water flow path thoroughly.
5. Once you have checked the water tank and the water flow path, plug your machine back in and turn it on. The light should turn green, indicating that it’s ready to use.

If the light is still yellow and flashing, and the machine is not working, contact Nespresso’s customer support for further assistance.

Yellow/Orange Light Blinking Three Times Per Second

If you see a yellow/orange light flashing three times per second on your Vertuo Next, it means that the machine is experiencing a capsule issue. The machine cannot detect the capsule, or there is an issue with the capsule itself. Here are the steps to fix this issue:

1. Turn off your machine and unplug it from the power source.
2. Check the capsule container to ensure that it is empty or has a capsule that is correctly placed.
3. If the capsule is damaged or stuck, remove it and clean the capsule container.
4. Once you have checked the capsule container and ensured that the capsule is correctly placed, plug your machine back in and turn it on. The light should turn green, indicating that it’s ready to use.

If the light is still yellow and flashing, and the machine is not working, contact Nespresso’s customer support for further assistance.

Yellow/Orange Light Pulses (Fades OFF, Then Fades Back ON)

If you see a yellow/orange light pulsing (fading off, then fading back on) on your Vertuo Next, it means that the machine is preparing to heat up. The machine will take a few minutes to heat up before it’s ready to use. Here are the steps to fix this issue:

1. Wait for a few minutes until the machine has heated up and the light turns green.
2. Once the light turns green, your machine is ready to use.

Solid Yellow/Orange Light On For 1.5 Seconds, OFF For 0.5 Seconds

If you see a yellow/orange light on for 1.5 seconds, then off for 0.5 seconds on your Vertuo Next, it means that the machine is brewing coffee. The light will turn off once the brewing process is complete. Here are the steps to fix this issue:

1. Wait for the brewing process to complete.
2. Once the brewing process is complete, the light will turn off, and your coffee will be ready to serve.

Solid Yellow/Orange Light For 1.5 Seconds, OFF For 0.5 Seconds

If you see the yellow/orange light turning on for 1.5 seconds and then turning off for 0.5 seconds, it indicates that the machine is in descaling mode. This means that it needs to be descaled to remove any build-up of calcium and mineral deposits inside the machine.

Here are the steps to follow to descale your Vertuo Next machine:

1. Fill the water tank with 500ml of water and add a descaling solution or citric acid to it as per the instructions on the package.
2. Make sure the capsule container is empty and remove any used capsules.
3. Press and hold the button on the top of the machine for at least 7 seconds until the light turns solid orange.
4. Place a container with a minimum capacity of 1 liter under the coffee outlet and press the button to start the descaling process.
5. The machine will automatically stop after dispensing a certain amount of water. Discard the water collected in the container and repeat the process until the descaling cycle is complete.
6. Once the cycle is complete, rinse the water tank and fill it with fresh water. Place a container under the coffee outlet and press the button to rinse the machine.
7. Repeat the rinse cycle with fresh water until the water tank is empty.
8. Finally, dispose of any remaining water in the container and refill the water tank with fresh water.

Yellow/Orange Light Flashes 5 Times In 10 Seconds

If you see the yellow/orange light flashing five times in 10 seconds, it indicates that the machine needs attention. This could be due to several reasons, such as the water tank being empty, the capsule container being full, or the machine needing descaling.

Here are the steps to follow to address this issue:

1. Check the water tank and refill it if necessary.
2. Check the capsule container and empty it if necessary.
3. If neither of the above steps works, it could be because the machine needs descaling.

Flashes Yellow Then White For 3 Seconds

If you see the light flashing yellow and then white for three seconds, it indicates that the machine is resetting to factory settings. This could be due to the machine malfunctioning or not functioning properly.

Here are the steps to follow to reset the machine to factory settings:

1. Press and hold the button on the top of the machine for at least 7 seconds until the light turns solid orange.
2. Release the button and wait for the light to start flashing yellow and white.
3. When the light stops flashing and turns off, the machine has been reset to factory settings.

Yellow/Orange Light Flashes 5 Times In 10 Seconds

If you see the yellow/orange light flashing five times in 10 seconds on your Vertuo Next machine, it is an indication that the machine requires your attention. This could be due to several reasons, such as the water tank being empty, the capsule container being full, or the machine needing descaling.

Here are some steps you can take to address this issue:

1. Check the water tank and refill it if necessary. The water tank should be properly seated and have enough water to brew your desired coffee. If the water level is low, fill the tank with fresh water and reposition it onto the machine.
2. Check the capsule container and empty it if necessary. If the capsule container is full, remove it from the machine, discard the used capsules, and reposition the container onto the machine.
3. If neither of the above steps works, it could be because the machine needs descaling.

Common FAQs on Nespresso Yellow Lights

Why is there a yellow light on my Nespresso?

There could be several reasons why there is a yellow light on your Nespresso machine. One common reason is that the machine needs to be descaled. Over time, calcium and mineral deposits can build up inside the machine, which can cause performance issues and reduce the lifespan of the machine. Another reason could be that the water tank is empty or the capsule container is full, in which case the machine will not function until these issues are addressed.

How do you fix a yellow blinking light on a Nespresso machine?

If your Nespresso machine has a yellow blinking light, the first step is to refer to the user manual or check the manufacturer’s website for troubleshooting steps. Often, a yellow blinking light means that the machine needs to be descaled, so this should be the first thing to try. If the issue persists after descaling, try refilling the water tank, emptying the capsule container, and ensuring that the capsule is inserted correctly. If none of these steps work, it may be necessary to contact Nespresso customer service for further assistance.

Why is my Nespresso blinking orange and yellow?

A Nespresso machine blinking orange and yellow could indicate that the machine needs to be descaled or that the water tank is empty. Check the user manual or manufacturer’s website for specific troubleshooting steps, but in general, descaling the machine should be the first step to try. If this doesn’t resolve the issue, check to make sure the water tank is full and that the capsule is inserted correctly.

How do I force my Nespresso to descaling mode?

To force a Nespresso machine into descaling mode, refer to the user manual or check the manufacturer’s website for specific instructions. In general, the steps will involve pressing and holding certain buttons on the machine while it is turned on. Keep in mind that forcing the machine into descaling mode may not be necessary if the machine is already indicating that it needs to be descaled.

Why is nespresso showing yellow light and not working?

A Nespresso machine showing a yellow light and not working could indicate a variety of issues, such as needing to be descaled, needing to be refilled with water, or needing to have a capsule inserted correctly. Refer to the user manual or check the manufacturer’s website for troubleshooting steps, and pay attention to the pattern of the yellow light for clues as to what the specific issue may be.

Why is there nespresso yellow light after descaling?

A Nespresso machine may show a yellow light after descaling if the descaling process was not completed correctly or if the machine needs additional cleaning. Refer to the user manual or check the manufacturer’s website for specific instructions on how to complete the descaling process properly. It may also be necessary to clean the machine thoroughly to remove any remaining mineral or calcium buildup.

Why is there nespresso yellow light blinking twice?

A Nespresso machine blinking yellow twice could indicate that the machine needs to be descaled or that there is an issue with the water tank. Check the user manual or manufacturer’s website for specific troubleshooting steps, but in general, descaling the machine and refilling the water tank should be the first steps to try.

Final Words

With the help of this guide, you now have a better understanding of what the Nespresso yellow light means on your Vertuo machine and how to fix any issues that may arise. Whether it’s a flashing light, a steady light, or a pulsing light, you can now confidently troubleshoot and fix any issues that come your way. So go ahead, brew your perfect cup of coffee, and enjoy every sip knowing that your Nespresso machine is working flawlessly!