How To Reset Descale On Keurig Supreme?

Keurig Supreme is a popular and convenient single-serve coffee maker that allows users to brew a wide range of beverages using K-Cup pods. Over time, mineral deposits and scale can build up inside the Keurig Supreme, affecting the taste and quality of the beverages it produces. To address this issue, the machine needs to be descaled at regular intervals. Descaling is essential to remove the mineral buildup and maintain the performance of the Keurig Supreme. This article provides a comprehensive guide on how to reset and perform the descaling process on the Keurig Supreme, ensuring that it continues to brew delicious and satisfying beverages.

Quick Answer: How To Reset Descale On Keurig Supreme

If you are looking for a quick solution, the following steps will guide you through resetting the descale function on your Keurig Supreme:

1. Press the power button to turn off the brewer.
2. Press and hold the 6 oz. and 8 oz. buttons simultaneously.
3. While holding the buttons, turn on the brewer by pressing the power button.
4. Continue holding the buttons until the water starts dispensing.
5. The brewer will initiate the descaling process.

In the following sections, we will delve into a more detailed, step-by-step guide, encompassing the preparation, descaling process, and maintenance of the Keurig Supreme.

Step-by-step Guide To Resetting The Descale Function On Keurig Supreme

1. Preparing Your Keurig Supreme For Descaling

Before embarking on the descaling process, it is crucial to prepare your Keurig Supreme to ensure a smooth and successful descaling operation. Here’s how you should prepare your brewer:

1. Empty the Water Reservoir: Start by removing the water reservoir from the Keurig Supreme and emptying any remaining water. It is essential to descale the machine with an empty water reservoir.

2. Remove K-Cup Pod: If there is a K-Cup pod in the machine, remove it before beginning the descaling process.

3. Ensure Sufficient Room: Place the machine on a suitable surface with enough room to work comfortably around it. This will ensure accessibility when performing the descaling procedure.

2. Choosing A Descaling Solution And How To Properly Mix It

Selecting the right descaling solution is pivotal to effectively and safely descale your Keurig Supreme. It is important to follow the manufacturer’s guidelines and use a descaling solution specifically recommended for your machine. Here are the steps to properly mix and prepare the descaling solution:

1. Check Manufacturer Recommendations: Refer to the Keurig Supreme’s user manual to identify the recommended descaling solution. Using a solution not approved by Keurig can potentially damage the machine.

2. Prepare Descaling Solution: Follow the instructions provided with the descaling solution to mix it with the appropriate amount of water. Typically, you will need to mix the descaling solution with water in the water reservoir.

3. Pour Solution into Water Reservoir: Once the descaling solution is properly mixed, pour it into the water reservoir of the Keurig Supreme. Ensure that you do not overfill the reservoir to prevent spillage during the descaling process.

3. Performing The Descale Process

Now that your Keurig Supreme is prepared and the descaling solution is ready, you can proceed with the descaling process by following these steps:

1. Resetting the Descale Function: As mentioned in the quick answer, reset the descale function by following these steps:

   • Press the power button to turn off the brewer.
   • Press and hold the 6 oz. and 8 oz. buttons simultaneously.
   • While holding the buttons, turn on the brewer by pressing the power button.
   • Continue holding the buttons until the water starts dispensing.
   • The brewer will initiate the descaling process.

2. Descaling Cycle Initiation: Once the descale function has been reset, the Keurig Supreme will start the descaling cycle. Follow the prompts on the machine’s display, if applicable, to complete the descaling process.

3. Rinsing the System: After the descaling cycle is complete, refill the water reservoir with fresh water. Run multiple brewing cycles without a K-Cup pod to thoroughly rinse the machine and remove any residual descaling solution.

4. Cleaning External Components: It is also important to clean the external components of the Keurig Supreme, such as the drip tray and exterior surfaces, to maintain overall cleanliness.

4. Maintenance And Care Tips After Descaling

Following the descaling process, it is essential to adopt certain maintenance and care practices to ensure the longevity and performance of your Keurig Supreme. Here are some valuable tips for post-descale maintenance:

1. Regular Descaling Schedule: Establish a regular descaling schedule based on your water quality and usage patterns. For most households, descaling every 3 to 6 months is recommended. However, if you notice a decrease in the brewer’s performance or taste of the beverages, consider descaling the machine sooner.

2. Use Filtered Water: Utilizing filtered or distilled water can help minimize mineral buildup inside the Keurig Supreme, potentially extending the time between descaling sessions.

3. Cleaning and Storage: Periodically clean the exterior of the machine and storage areas, and ensure the water reservoir is dry when the machine is not in use for an extended period.

4. Regular Maintenance Checks: Conduct routine checks on the machine’s components, such as the water reservoir, to ensure no blockages or issues that may affect its performance.

Descaling your Keurig Supreme is a critical maintenance task that ensures the machine continues to produce flavorful and high-quality beverages. By understanding the process of resetting and descaling the Keurig Supreme, as well as adopting post-descale maintenance practices, you can preserve the performance and longevity of your beloved coffee maker. Remember to always refer to the manufacturer’s guidelines and use approved descaling solutions to maintain the machine’s warranty and ensure safe and effective descaling. By following these comprehensive steps, you can enjoy delicious, well-brewed beverages from your Keurig Supreme for years to come.

Running The Descaling Cycle On Your Keurig Supreme

The Keurig Supreme is a popular and convenient coffee brewing machine that allows you to enjoy a variety of beverages with just the touch of a button. Over time, calcium deposits and mineral buildup can accumulate within the machine, affecting its performance and the taste of your brewed beverages. To ensure optimal performance and the longevity of your Keurig Supreme, it is important to regularly descale the machine.

Before resetting the descale notification, it is crucial to run a descaling cycle on your Keurig Supreme. This process removes mineral deposits, limescale, and other impurities from the internal components of the machine. Here are the steps to run the descaling cycle:

1. Begin by filling the water reservoir of your Keurig Supreme with a mixture of equal parts white vinegar and water. Make sure to fill the reservoir up to the maximum capacity.

2. Place a large mug or container on the drip tray to collect the descaling solution.

3. Power on the Keurig Supreme and wait for it to heat up.

4. Once the machine is ready, select a large brew size (10 oz or more) on the control panel and start the brewing process. The descaling solution will begin to go through the internal components of the machine and into the mug or container.

5. Empty the mug or container once it is filled with the descaling solution. Be cautious as the liquid might be hot.

6. Repeat the brewing process until the water reservoir is empty. This ensures that the descaling solution has thoroughly cleaned the internal components of the machine.

7. Once the water reservoir is empty, fill it with clean water and repeat the brewing process without a K-Cup. This step rinses any remaining descaling solution from the machine.

8. Repeat the rinse process until the water reservoir is empty to ensure complete removal of any remaining descaling solution.

Flushing And Rinsing The Machine After Descaling

After completing the descaling cycle, it is important to flush and rinse your Keurig Supreme to remove any residual descaling solution and ensure the taste of your brewed beverages is not affected. Follow these steps to flush and rinse your machine:

1. Empty the water reservoir of any leftover water.

2. Fill the water reservoir with clean water.

3. Place a large mug or container on the drip tray.

4. Start a brewing cycle without a K-Cup. This flushes clean water through the internal components of the machine and into the mug or container.

5. Repeat the brewing process until the water reservoir is empty to ensure all residual descaling solution is flushed out.

6. Once the water reservoir is empty, refill it with clean water and repeat the brewing process without a K-Cup. This additional rinse ensures any remaining residue is thoroughly removed.

Optional Steps For Deep Cleaning And Maintenance Of Your Keurig Supreme

To keep your Keurig Supreme in top condition and prevent any issues, there are a few optional steps you can take for deep cleaning and maintenance:

1. Remove and clean the drip tray and K-Cup holder: Regularly removing and cleaning these components helps prevent mold, bacteria, and residue buildup. Rinse them with warm soapy water, thoroughly dry, and reassemble them back into the machine.

2. Clean the needle and funnel: Over time, coffee grounds and debris can clog the needle and funnel, affecting the flow of water and the taste of your brewed beverages. To clean the needle, use a paperclip or the Keurig Needle Cleaning Tool (if provided with your machine) to gently unclog any blockage. For the funnel, remove it and rinse it under warm water to remove any residue.

3. Descale on a regular basis: Regular descaling is crucial to remove mineral buildup and ensure the long-term performance of your Keurig Supreme. It is recommended to descale the machine every 3-6 months, depending on the hardness of your water.

4. Use filtered or bottled water: Using filtered or bottled water can help reduce mineral buildup and maintain the quality of your brewed beverages. Hard water with high mineral content can lead to quicker scale buildup.

5. Store the machine properly: If you are not using your Keurig Supreme for an extended period, it is important to store it properly. Empty and clean the water reservoir and ensure the machine is dry before storing it in a cool and dry place.

Troubleshooting Common Issues During Descaling And Reset Process

While descaling and resetting the descale notification on your Keurig Supreme is a straightforward process, you may encounter some common issues along the way. Here are a few troubleshooting tips to help you overcome these issues:

1. Machine not powering on: Ensure that the power cord is securely plugged into a functioning power outlet. If the issue persists, try resetting the machine by unplugging it for a few minutes and then plugging it back in.

2. Descale notification not resetting: If the descale notification does not reset after completing the descaling cycle, try pressing and holding the "Strong" and "Hot Water" buttons simultaneously for a few seconds. This should reset the notification. If the issue persists, consult the user manual or contact Keurig customer support for further assistance.

3. Residual vinegar taste: If you notice a lingering vinegar taste in your brewed beverages after descaling, continue to rinse the machine with fresh water. You may need to repeat the flushing and rinsing steps multiple times to completely remove the vinegar taste.

4. Slow or incomplete brewing: If the brewing process is slower than usual or fails to complete, it might be due to mineral buildup in the system. Run additional cleaning cycles or perform a more thorough descaling process to address the issue. If the problem persists, consult the user manual or contact Keurig customer support for further assistance.

Conclusion

Regularly descaling your Keurig Supreme is essential to maintain its performance and the taste of your brewed beverages. By following the steps outlined in this article, you can easily run the descaling cycle, reset the descale notification, and ensure your machine is clean and ready to brew delicious coffee, tea, and other beverages. Additionally, taking the optional steps for deep cleaning and maintenance will help prolong the lifespan of your Keurig Supreme and ensure optimal performance for many years to come.

FAQS

What Is Descaling And Why Is It Necessary For Keurig Supreme?

Descaling is a process of removing mineral buildup in your Keurig Supreme machine. It is necessary to ensure that your machine can continue to function effectively and produce great-tasting coffee.

How Often Should I Descale My Keurig Supreme?

The frequency of descaling depends on your personal usage and your water source. As a general rule, it is recommended to descale your machine every three to six months.

What Are The Steps In Resetting The Descale On Keurig Supreme?

First, turn off your Keurig Supreme machine. Then, hold down the "8oz" and "10oz" buttons simultaneously while pressing the power button. Release all three buttons and select the "8oz" button to reset the descale function.

What Are The Signs That Indicate It Is Time To Descale My Keurig Supreme?

The most common signs of mineral buildup in your Keurig Supreme machine are slower brew times, less coffee production, and odd tastes or odors in your coffee.

Can I Descale My Keurig Supreme With Vinegar Instead Of A Descaling Solution?

Yes, vinegar is a great alternative if you don’t have a descaling solution. Simply mix one part vinegar to one part water, fill your water reservoir, and run a brew cycle. Rinse with water and run two more brew cycles to ensure all the vinegar is removed.